News

/News/

July 2019

IRO AB launches ZTF Zero Twist Feeder at ITMA 2019

By | July 18th, 2019|composite news|

IRO AB launches ZTF Zero Twist Feeder at ITMA 2019 IRO AB, a member of the Vandewiele group, reported that they recently launched the ZTF Zero Twist Feeder at ITMA 2019 in Barcelona, ​​especially in the composite textile reinforcement market. The company explained that in the woven carbon fiber, glass fiber and aramid fiber and [...]

Comments Off on IRO AB launches ZTF Zero Twist Feeder at ITMA 2019

Airbus AlbatrossOne’s flaps are made of carbon and fiberglass

By | July 18th, 2019|composite news|

Airbus AlbatrossOne's flaps are made of carbon and fiberglass Airbus engineers developed AlbatrossOne, a proportional model aircraft with the first in-flight flapping wing tip that revolutionized the wing design. The flapping wing consists of parts made of carbon fiber and glass fiber reinforced polymer and additive layers. The "semi-pneumatic elastic hinge" concept of the tip [...]

Comments Off on Airbus AlbatrossOne’s flaps are made of carbon and fiberglass

Expliseat produces aircraft seats using the world’s lightest carbon fiber

By | July 18th, 2019|composite news|

Expliseat produces aircraft seats using the world's lightest carbon fiber De Havilland Aircraft of Canada Limited announced the Expliseat's ultralight seat as an optional feature of the Dash 8-400 aircraft. Expliseat produces the world's lightest aircraft seats using advanced materials such as carbon fiber and titanium. The TiSeat E2 contributes only 6.5 kg per passenger. [...]

Comments Off on Expliseat produces aircraft seats using the world’s lightest carbon fiber

Ashland Propulsion Composite Wind Turbine Recycling

By | July 17th, 2019|composite news|

Ashland Propulsion Composite Wind Turbine Recycling WindEurope, the European Chemical Industry Council (CEFIC) and the European Composites Industry Association (EuCIA) have created an inter-departmental platform to advance new approaches to wind turbine blade recycling. As a member of CEFIC, Ashland is supporting efforts to promote cement production as a true recycling and development alternative recycling [...]

Comments Off on Ashland Propulsion Composite Wind Turbine Recycling

An alliance to provide innovative solutions for carbon thermoplastic composite structures

By | July 17th, 2019|composite news|

An alliance to provide innovative solutions for carbon thermoplastic composite structures Hexcel, Arkema and its partners announced that their joint project “HAICoPAS” has been approved by Bpifrance and supported by the French Investissements d\'Avenir program (with a grant of €6 million). The HAICoPAS project is a total of €13.5 million in collaborative projects led by [...]

Comments Off on An alliance to provide innovative solutions for carbon thermoplastic composite structures

ELG carbon fiber provides recycled carbon fiber for rowing

By | July 15th, 2019|composite news|

ELG carbon fiber provides recycled carbon fiber for rowing ELG Carbon Fiber (Coseley, UK) works with the British sailing team INEOS Team UK to ensure that sustainable materials and practices are incorporated into the 2021 America's Cup construction program. Specifically, ELG's recycled carbon fiber material will be used to produce the AC75 ship type that [...]

Comments Off on ELG carbon fiber provides recycled carbon fiber for rowing

Korea Carbon Technology Research Institute (KCTECH) and Swedish Science and Technology Research Institute signed a memorandum of cooperation

By | July 15th, 2019|composite news|

Korea Carbon Technology Research Institute (KCTECH) and Swedish Science and Technology Research Institute signed a memorandum of cooperation The Korea Carbon Technology Research Institute (KCTECH) visited the Swedish Science and Technology Research Institute (RISE SICOMP) office in Linköping, Sweden in June, and held a preliminary discussion on the possibility of research and innovation cooperation, and [...]

Comments Off on Korea Carbon Technology Research Institute (KCTECH) and Swedish Science and Technology Research Institute signed a memorandum of cooperation

Walter Carbon Fiber and Shenzhen Langbowan signed a strategic cooperation agreement

By | July 15th, 2019|composite news|

Walter Carbon Fiber and Shenzhen Langbowan signed a strategic cooperation agreement On June 21, 2019, Walter Carbon Fiber and Shenzhen Langbowan signed a strategic cooperation agreement in Shenzhen. Both parties agreed to establish a comprehensive and in-depth strategic partnership in the development and application of new resins and new composite materials for automotive parts. General [...]

Comments Off on Walter Carbon Fiber and Shenzhen Langbowan signed a strategic cooperation agreement

SUV front end bracket made of continuous fiber reinforced thermoplastic composite

By | July 15th, 2019|composite news|

SUV front end bracket made of continuous fiber reinforced thermoplastic composite The front end bracket of the Mercedes-Benz GLE SUV consists of two welded composite half-shells made of LANXESS' Tepex dynalite 104-RG600(3)/47% material, which gives the component carbon fiber The same sporty look. Tepex dynalite continuous fiber reinforced thermoplastic composite sheet from specialty chemicals company [...]

Comments Off on SUV front end bracket made of continuous fiber reinforced thermoplastic composite

Carbon fiber testing 4 core technologies to help break the development of new energy vehicles

By | July 15th, 2019|composite news|

Carbon fiber testing 4 core technologies to help break the development of new energy vehicles Hexagon manufactures the intelligent Apodius 3D image measurement system with the absolute-arm laser scanning system as the data acquisition device. With the HP-C-V3D optical probe and Explorer 3D measurement software, the contours of the components can be quickly and efficiently [...]

Comments Off on Carbon fiber testing 4 core technologies to help break the development of new energy vehicles

BASF’s Ultramid® Advanced high temperature nylon portfolio empowers customers

By | July 15th, 2019|composite news|

BASF's Ultramid® Advanced high temperature nylon portfolio empowers customers In order to cope with the accelerated development of electric transportation, miniaturization and electrification, the market urgently needs new plastics that can be applied to harsh conditions to meet the requirements of designing and developing new parts in the future. Since this market challenge cannot be [...]

Comments Off on BASF’s Ultramid® Advanced high temperature nylon portfolio empowers customers

Avizo software for composites

By | July 15th, 2019|composite news|

Avizo software for composites Thermo Scientific TM AvizoTM software provides an optimized workflow for solving the entire cycle of “from research to production”: from the analysis of fibers, pores and matrices in the laboratory to the automatic control of part quality in a production environment. Regardless of the method (X-ray computed tomography, synchrotron, or electron [...]

Comments Off on Avizo software for composites

NCC collaborates with Surface Generation to demonstrate the ability of thermoplastic overmolding

By | July 15th, 2019|composite news|

NCC collaborates with Surface Generation to demonstrate the ability of thermoplastic overmolding Surface Generation collaborated with the National Composites Centre of the United Kingdom to produce a number of carbon fiber reinforced PA6 automotive demonstration parts using the latter's PtFS technology. Each part contains 4 continuous carbon fiber reinforced PA6 composite inserts made of short [...]

Comments Off on NCC collaborates with Surface Generation to demonstrate the ability of thermoplastic overmolding

BASF collaborates with Impossible Objects to bring carbon fiber PA6 into 3D printing

By | July 13th, 2019|composite news|

BASF collaborates with Impossible Objects to bring carbon fiber PA6 into 3D printing With its latest 3D printing system, CBAM-2, and its cooperation with BASF in PA6 carbon fiber composites, Impossible Objects brings its patented composite-based additive manufacturing process to an unprecedented industrial application. Impossible Objects has introduced a new generation of 3D printers and [...]

Comments Off on BASF collaborates with Impossible Objects to bring carbon fiber PA6 into 3D printing

Hollow structural composite parts can already be made

By | July 12th, 2019|composite news|

Hollow structural composite parts can already be made HP-RTM composite parts with irregular shapes or hollow structures with embedded inserts can now be produced in an industrialized manner using new technologies developed by Cannon Afros. How to produce hollow-structured carbon fiber reinforced composite parts by industrial methods? Cannon Afros offers an effective solution. Cannon Afros [...]

Comments Off on Hollow structural composite parts can already be made

Redelease expands product portfolio with Olin epoxy

By | July 12th, 2019|composite news|

Redelease expands product portfolio with Olin epoxy Traditional Brazilian chemical product distributor Redelease has expanded its product portfolio to include epoxy resins produced by North American company Olin, which produces the polymer worldwide - in 2015, acquired Dow's epoxy resin business . With the launch of these products, Redelease is the latest choice for industrial [...]

Comments Off on Redelease expands product portfolio with Olin epoxy

Carbon fiber hybrid piano with built-in battery

By | July 12th, 2019|composite news|

Carbon fiber hybrid piano with built-in battery Exxeo is a high-tech piano made of carbon fiber, premium automotive leather and aerospace grade aluminum. Advanced soundboard speaker system; reproduces the wide dynamic range of the grand piano with a 200 watt 9-speaker sound system. Its dedicated built-in battery allows the piano to be charged up to [...]

Comments Off on Carbon fiber hybrid piano with built-in battery

Lightweight rear seats with composite design

By | July 12th, 2019|composite news|

Lightweight rear seats with composite design Tepex continuous fiber reinforced composites from specialty chemicals company Lanxess are mass producing a variety of structural components for light vehicle designs. An example of this is the Audi A8. The car is also equipped with two independently adjustable rear seats that are electrically adjustable. The outer casing is [...]

Comments Off on Lightweight rear seats with composite design

BMW Vision M NEXT will use glass fiber and carbon fiber in large quantities

By | July 11th, 2019|composite news|

BMW Vision M NEXT will use glass fiber and carbon fiber in large quantities The BMW Vision M NEXT heralds BMW's design direction for the future car. The design of the BMW Vision M NEXT clearly conveys the brand's mission statement, the proportion of the sport car and the clarity of the surface contours, adding [...]

Comments Off on BMW Vision M NEXT will use glass fiber and carbon fiber in large quantities

Faurecia has created a global expertise center dedicated to hydrogen fuel tanks in France

By | July 10th, 2019|composite news|

Faurecia has created a global expertise center dedicated to hydrogen fuel tanks in France Faurecia's goal is to invest in the development of a new generation of high-pressure storage tanks that are more efficient and lighter, as well as in the characteristic testing centers of these tanks. The center is scheduled to begin operations in [...]

Comments Off on Faurecia has created a global expertise center dedicated to hydrogen fuel tanks in France

EconCore collaborates with Ultrapolymers and DuFor to develop recycled PET honeycomb

By | July 10th, 2019|composite news|

EconCore collaborates with Ultrapolymers and DuFor to develop recycled PET honeycomb EconCore is an expert in thermoplastic honeycomb core production technology, working with Ultrapolymers and DuFor to develop new products in a research and development project funded by the Flemish government: a thermoplastic honeycomb core made from recycled PET. The basis for this development is [...]

Comments Off on EconCore collaborates with Ultrapolymers and DuFor to develop recycled PET honeycomb

Deakin University in Australia develops composite reinforcement that makes concrete structures more durable

By | July 8th, 2019|composite news|

Deakin University in Australia develops composite reinforcement that makes concrete structures more durable Although many people may think that concrete structures such as bridges have not been maintained for decades, they are not. An experimental new type of threaded composite bar at Deakin University in Australia may revolutionize the reality that reinforced concrete needs to [...]

Comments Off on Deakin University in Australia develops composite reinforcement that makes concrete structures more durable

Schunk Carbon Technology uses Anisoprint composite 3D printing technology

By | July 8th, 2019|composite news|

Schunk Carbon Technology uses Anisoprint composite 3D printing technology The company is using Anisoprint's Composer 3D printers, software and materials. Anisoprint, a Russian and Luxembourg-based company specializing in composite fiber 3D printing, has released one of its newest customers: Schunk Carbon Technology. The company is a division of the Schunk Group in Germany and a [...]

Comments Off on Schunk Carbon Technology uses Anisoprint composite 3D printing technology

VABO composite builds superstructure and mast for Royal Van Lent

By | July 8th, 2019|composite news|

VABO composite builds superstructure and mast for Royal Van Lent Use robotic automation to further increase the productivity of lightweight marine composites. VABO composites have an exciting contract with a Dutch high-end yacht manufacturer Royal Fan to build an exciting contract of 2 superstructures and masts. Composites selected for use in the upper part of [...]

Comments Off on VABO composite builds superstructure and mast for Royal Van Lent

Composite materials will be used to replace wood at the Virginia Ferry Terminal

By | July 6th, 2019|composite news|

Composite materials will be used to replace wood at the Virginia Ferry Terminal The agency said that because FRP has a longer life cycle, fewer service interruptions, and safer operations, it is more cost effective. In 2018, VDOT replaced eight piles, 37 of which consisted of large FRP single pile dolphins. According to reports, a [...]

Comments Off on Composite materials will be used to replace wood at the Virginia Ferry Terminal

Carbon fiber innovative materials made from algae

By | July 6th, 2019|composite news|

Carbon fiber innovative materials made from algae Combined with natural granite or other types of hard rock, carbon fiber makes new building and building materials possible. Theoretical calculations show that if carbon fiber is produced from algae oil, the production of innovative materials extracts more carbon dioxide from the atmosphere than it releases. A research [...]

Comments Off on Carbon fiber innovative materials made from algae

Progress in thermal conductivity of short-cut carbon fiber reinforced polymer materials in Ningbo

By | July 5th, 2019|composite news|

Progress in thermal conductivity of short-cut carbon fiber reinforced polymer materials in Ningbo The chopped carbon fiber is formed by chopping carbon fiber filaments through fibers, and can be more uniformly dispersed in the matrix material than the carbon fiber filaments. Short-cut carbon fiber not only has high mechanical strength, low density and good thermal [...]

Comments Off on Progress in thermal conductivity of short-cut carbon fiber reinforced polymer materials in Ningbo

Hexcel Announces Official Opening of Aerospace Test Lab in Shanghai

By | July 4th, 2019|composite news|

Hexcel Announces Official Opening of Aerospace Test Lab in Shanghai Hexcel, Progen and Future Aerospace celebrate the official opening of their new joint venture laboratory and materials testing facility in Shanghai, China. Future Aerospace Hexcel Commercial Composites Testing Ltd. (FAHCCT) will provide China with a world-class aerospace standard material testing laboratory that provides technical services, [...]

Comments Off on Hexcel Announces Official Opening of Aerospace Test Lab in Shanghai

Tianzhu New Materials held a joint venture signing ceremony with CAF P&A of Spain

By | July 3rd, 2019|composite news|

Tianzhu New Materials held a joint venture signing ceremony with CAF P&A of Spain The joint venture signing ceremony of Tianhao New Materials Co., Ltd. (hereinafter referred to as “Tianyi New Material”) and Spanish rail transit vehicle manufacturing supplier CAF Power & Automation, S.L. (hereinafter referred to as CAF) was held in Changzhou on June [...]

Comments Off on Tianzhu New Materials held a joint venture signing ceremony with CAF P&A of Spain

Coriolis new C5 automatic fiber laying machine promotes wing manufacturing technology innovation

By | July 3rd, 2019|composite news|

Coriolis new C5 automatic fiber laying machine promotes wing manufacturing technology innovation Coriolis Composites recently announced that the National Composites Center (NCC) has purchased the new C5 automatic fiber laying machine developed by the company, becoming the first user since the launch of this new product. Coriolis Composites is a long-term partner of NCC, providing [...]

Comments Off on Coriolis new C5 automatic fiber laying machine promotes wing manufacturing technology innovation

June 2019

Volvo’s autonomous Vera transporter uses a large amount of composite material

By | June 29th, 2019|composite news|

Volvo's autonomous Vera transporter uses a large amount of composite material Vera is a wired driverless truck described by Mikael Karlsson, vice president of Volvo's Truck Automation Solutions, "a supplement to our current product...still under development". Its graphic design is reminiscent of Williams Advanced Engineering's FW-EVX electric vehicle platform, while Vera is also battery powered, [...]

Comments Off on Volvo’s autonomous Vera transporter uses a large amount of composite material

Institut de Soudure Group optimizes production control of large composite parts

By | June 29th, 2019|composite news|

Institut de Soudure Group optimizes production control of large composite parts By introducing innovative infrarouge thermal imaging technology, the Institut de Soudure Group will enable its Composite Integrity brand to control production of large-size composite parts faster and at lower cost. The technology will be launched at the Porcelette plant in Lorraine (eastern France) in [...]

Comments Off on Institut de Soudure Group optimizes production control of large composite parts

Hybrid composite metal anti-roll bar technology for railway and heavy road vehicles

By | June 29th, 2019|composite news|

Hybrid composite metal anti-roll bar technology for railway and heavy road vehicles Engineers at Performance Engineered Solutions (PES) are working on the project, which is funded by UK innovation agencies Innovate UK and Tinsley Bridge and the University of Sheffield Advanced Manufacturing Research Center (AMRC). The project is studying the development and manufacture of lightweight [...]

Comments Off on Hybrid composite metal anti-roll bar technology for railway and heavy road vehicles

Fiberject technology for the production of three-dimensional thermoplastic carbon fiber exterior parts

By | June 29th, 2019|composite news|

Fiberject technology for the production of three-dimensional thermoplastic carbon fiber exterior parts MCT developed the Fiberject technology to produce three-dimensional appearance organic sheets. Fiberject technology enables the production of complex, fully integrated and highly accurate carbon fiber exterior parts in large quantities using thermoplastic matrix materials. 3D thermoplastic carbon fiber exterior parts produced using Fiberject [...]

Comments Off on Fiberject technology for the production of three-dimensional thermoplastic carbon fiber exterior parts

Honda S660 roof is made of CFRP prepreg

By | June 29th, 2019|composite news|

Honda S660 roof is made of CFRP prepreg Mitsubishi Chemical Corporation announced that its carbon fiber reinforced plastic (CFRP) prepreg has been developed and manufactured by the Yachiyo S600, a CFRP roof. The Yachiyo industry uses a prepreg sheet carbon fiber intermediate material impregnated with epoxy resin - for prepreg compression molding (PCM). PCM is [...]

Comments Off on Honda S660 roof is made of CFRP prepreg

The world’s first aircraft with carbon fiber thermoplastic laminates is officially delivered

By | June 24th, 2019|composite news|

The world's first aircraft with carbon fiber thermoplastic laminates is officially delivered Recently, Teijin Limited announced that Airbus' new generation of ultra-wide medium-sized passenger aircraft A350 XWB with Teijin's Tenax® TPCL carbon fiber thermoplastic laminate has been delivered to Japan Airlines and arrived in Tokyo on June 14. Haneda Airport. As a top supplier to [...]

Comments Off on The world’s first aircraft with carbon fiber thermoplastic laminates is officially delivered

Foreign companies introduce plant lignin technology into the interior of the car

By | June 24th, 2019|composite news|

Foreign companies introduce plant lignin technology into the interior of the car Recently, Yanfeng Automotive Interiors (YFAI) and Prisma Recycled Composites announced that the two companies have reached an agreement that YFAI exclusively uses Prisma's lignin-based composite materials to develop automotive interior products. Prisma's BioLAN materials are produced from lignin, a natural by-product of the [...]

Comments Off on Foreign companies introduce plant lignin technology into the interior of the car

Premium AEROTEC showcases its thermoplastic CFRP pressure bulkhead

By | June 24th, 2019|composite news|

Premium AEROTEC showcases its thermoplastic CFRP pressure bulkhead The sample exhibited at the Paris Air Show in 2019 is the second generation of thermoplastic welded pressure bulkheads for single-pass passenger jets. Its predecessor was first broadcast in Berlin in 2018. The 1:1 demonstrator of the Airbus A320 family of aircraft uses state-of-the-art resistance welding technology [...]

Comments Off on Premium AEROTEC showcases its thermoplastic CFRP pressure bulkhead

Ningbo Materials is making progress in promoting graphene super anti-corrosion coating

By | June 24th, 2019|composite news|

Ningbo Materials is making progress in promoting graphene super anti-corrosion coating Marine corrosion is one of the main causes of failure of offshore equipment and a global problem of corrosion resistance. The discovery of two-dimensional materials, especially graphene, provides new ideas for the development of new marine equipment anti-corrosion coatings. Graphene has a monoatomic layer [...]

Comments Off on Ningbo Materials is making progress in promoting graphene super anti-corrosion coating

GKN Aerospace supplies thermoplastic composite parts for Bell V-280 Valor

By | June 22nd, 2019|composite news|

GKN Aerospace supplies thermoplastic composite parts for Bell V-280 Valor GKN Aerospace has delivered a pair of thermoplastic composites, Inductively Welded Ruddervators and two compression molded access panels made from reusable thermoplastic waste to Text Helicopter. The Ruddervators are the control surfaces for aircraft with a V-tail configuration. As a partner of Bell's Team Valor, [...]

Comments Off on GKN Aerospace supplies thermoplastic composite parts for Bell V-280 Valor

China’s next-generation carbon fiber subway train successfully tested

By | June 21st, 2019|composite news|

China's next-generation carbon fiber subway train successfully tested On June 19th, the reporter learned from CRRC Sifang Co., Ltd. that the six-group next-generation subway train developed by the company successfully completed the test run on the commissioning line. The train uses a large number of new technologies and new materials to represent the future of [...]

Comments Off on China’s next-generation carbon fiber subway train successfully tested

Japanese companies will introduce new carbon fiber aircraft parts cost or halve

By | June 21st, 2019|composite news|

Japanese companies will introduce new carbon fiber aircraft parts cost or halve In the field of carbon fiber, Japan Toray and Teijin will successively put new materials for aircraft manufacturing to the market. New products are easy to mass-produce and process, and the production costs of future parts are expected to be reduced by up [...]

Comments Off on Japanese companies will introduce new carbon fiber aircraft parts cost or halve

Times New Materials Completed an annual output of 3,000 tons of aramid paper demonstration line

By | June 21st, 2019|composite news|

Times New Materials Completed an annual output of 3,000 tons of aramid paper demonstration line Recently, Zhuzhou Times New Materials Technology Co., Ltd. led the national key R&D plan key infrastructure material technology upgrading and industrialization special project - "paper-based lightweight structural weight loss material preparation technology" project, successfully passed the mid-term inspection of the [...]

Comments Off on Times New Materials Completed an annual output of 3,000 tons of aramid paper demonstration line

GKN Aerospace produces the first demonstration wing component for the Airbus “Wings of the Future” project

By | June 21st, 2019|composite news|

GKN Aerospace produces the first demonstration wing component for the Airbus "Wings of the Future" project GKN Aerospace, UK, announced during the 2019 Paris Air Show that it has produced a number of structural components for the first demonstration wing for Airbus's "Wings of the Future" project, which are part of the spar sample. GKN [...]

Comments Off on GKN Aerospace produces the first demonstration wing component for the Airbus “Wings of the Future” project

Huangpu Wenchong enters the basalt material industry chain

By | June 21st, 2019|composite news|

Huangpu Wenchong enters the basalt material industry chain Recently, CSIC Huangpu Wenchong Ship Co., Ltd., a subsidiary of Heavy Industry Co., Ltd., signed a strategic cooperation agreement with Sichuan Aerospace Extension Xin Basalt Industrial Co., Ltd. According to the content of the agreement, the two parties will combine the application scenario requirements and scientific research [...]

Comments Off on Huangpu Wenchong enters the basalt material industry chain

Hunan Shixin new material carbon ceramic composite production line is put into production.

By | June 21st, 2019|composite news|

Hunan Shixin new material carbon ceramic composite production line is put into production. The product will be used for high speed trains with a speed of 400 kilometers per hour. On June 18th, Hunan Shixin New Materials Co., Ltd. held a carbon ceramic composite material production line and a 400-kilometre high-speed train carbon-ceramic brake disc [...]

Comments Off on Hunan Shixin new material carbon ceramic composite production line is put into production.

British company develops next-generation 3D loom

By | June 20th, 2019|composite news|

British company develops next-generation 3D loom Recently, British three-dimensional loom manufacturer Optima 3D announced the successful development of the new Series 500 three-dimensional loom. This is the next generation of looms developed by Optima 3D to cope with the rapid development of the 3D composites market. Compared to conventional weaving machines, the Series 500 series [...]

Comments Off on British company develops next-generation 3D loom

Basalt fiber industry innovation and development

By | June 20th, 2019|composite news|

Basalt fiber industry innovation and development On the morning of June 15, the symposium and strategic cooperation signing ceremony for the basalt fiber industry innovation and development in Guang'an City, Sichuan Province was held in Beijing. More than 100 relevant leaders from national ministries and commissions, provincial institutes, research institutes, university experts, and business people [...]

Comments Off on Basalt fiber industry innovation and development

CCS develops composite wing for the Ethiopian electric aircraft

By | June 20th, 2019|composite news|

CCS develops composite wing for the Ethiopian electric aircraft Singapore Composites Group announced at the Paris Air Show that wing and abdomen fairings were designed for Alice's all-electric aircraft Singapore Integrated Clusters (CCS) has announced the development of Aviation's all-electric aircraft Alice in cooperation with Flight Aircraft, which debuted at the Paris Air Show in [...]

Comments Off on CCS develops composite wing for the Ethiopian electric aircraft

Saertex supplies materials for 87.5m carbon fiber spar caps

By | June 20th, 2019|composite news|

Saertex supplies materials for 87.5m carbon fiber spar caps It is said to be the prototype of the longest-running blade spar cap, which is manufactured by vacuum infusion. Saertex (Saerbeck, Germany) announced its contribution to the production of prototype carbon fiber spar caps produced using vacuum infusion technology. According to Saertex, the spar cap with [...]

Comments Off on Saertex supplies materials for 87.5m carbon fiber spar caps